...
Home › Services › Front Doors
Front Doors

Front Doors for Southwest Florida

Impact rated front doors with the decorative glass, sidelights and hardware you actually want. Measured, permitted and hung by our own crew.

A front door is the one thing we sell where how it looks matters as much as what it does. It is the first thing anyone sees and it is also a rated opening, and those two pull against each other unless the door is built for both.

Fiberglass or aluminum slabs. Fiberglass takes a convincing wood grain and insulates better, which matters on a door that faces west. Glass runs from a small vision panel through half lite to full lite, clear, obscured, textured or decorative with leaded or wrought iron detail. Sidelights one or both sides, with or without a transom above.

Painted finishes in any color, and wood grains from light oak through to dark walnut and mahogany. Hardware in satin nickel, oil rubbed bronze, matte black, brass or chrome. Multipoint locks come in the same finishes, and a smart lock can be fitted to most of them if that is what you want.

INTERIOR FINISHES
EXTERIOR PALETTE

The slab and the glass do most of it. A solid fiberglass door with a vision panel is one end, decorative full lite with two sidelights and a transom is the other. Hardware moves it less than people expect. What can move it is the opening itself, if the door has dropped or the threshold and floor need work.

Front doors carry a Miami-Dade NOA or Florida Product Approval rated for your address, covering the frame, slab and hardware as one assembly. Sidelights and transoms are part of the same approval. Permitted in Lee and Collier, pulled by us, inspected at final.

What makes a front door impact rated explained

What makes a front door impact rated for Florida homes?

A front door is the one thing we sell where how it looks matters as much as what it does. It is the first thing anyone sees and it is also a rated opening, and those two pull against each other unless the door is built for both.

The rating comes from the whole assembly, frame and slab and hardware approved together for your wind zone. The look comes from the slab style, the glass and the finish. A good impact front door gives you both, so the house is protected to code without looking like it is wearing armor.

Every other day it is the door doing the quiet things a front door should. Sealing out the heat and the afternoon sun, shutting off the street noise, locking solid at three points, and giving the front of the house the face you actually wanted when you bought it.

Impact front door with a rated sidelight · Cape Coral, FL

How it works

Our front door process.

1.

Free home measure

We measure the opening, check it is square, and look at the threshold and the floor while we are there.

2.

Pick your slab, glass and hardware

This is the fun one. Style, glass, finish and lock. We bring samples rather than sending you a catalog.

3.

We pull the permit

Product approvals for the whole assembly including sidelights, plus the permit in your county.

4.

We hang it and meet the inspector

Our own crew. Frame set and shimmed, threshold sealed, and the door adjusted so it closes with one hand.

Recent installs

Recent Impact Window & Door Projects
across Southwest Florida

Ready to do this? Let’s get you a number.

Answer a few questions and you get a price on the spot. If you want it checked properly after that, we come out and measure every opening ourselves.

Why us for hurricane protection.

Anybody can quote hurricane protection. These are the four things you can go and check on us yourself, before you sign anything.

It has to look right and be rated

Plenty of rated doors look like rated doors. Choosing well means you get the approval numbers and a front of the house you like.

The whole assembly is approved

Frame, slab, hardware, sidelights and transom together. A rated slab in an old frame is not a rated door.

We fix the opening first

Older front doors drop and the opening goes out of square. We rebuild it rather than shimming a new door into a bad hole.

Nobody subcontracts your house

Our own crew hangs it and adjusts it. A front door that needs a shoulder to close is a front door that was rushed.

What we do

All the window services you need, in one place.

Impact windows, impact and entry doors, sliding glass doors, hurricane shutters, hurricane screens and repairs. Choose what you came for below.

I need to
Impact Windows

Impact Windows

Laminated glass that takes the hit and stays in the frame. Nothing to put up.

Spec
Rated past 150 mph
Good for
Set and forget
How long
1–2 days

See impact windows

Impact Doors

Impact Doors

Entry and patio doors rated to the same standard as the glass around them.

Spec
Coastal-code approved
Good for
Front, back, patio
How long
1 day per door

See impact doors

Front Doors

Front Doors

A new entry that seals, latches and shuts right. Fiberglass, steel or glass.

Spec
Impact optional
Good for
Curb appeal, seal
How long
1 day

See front doors

Glass Repair

Glass Repair

Cracked pane, blown seal, fog between the glass. Re-glazed in the frame you have.

Spec
Re-glaze in frame
Good for
One pane, not a unit
How long
3–7 days for glass

See glass repair

Door Repair

Door Repair

Sticking slabs, dropped hinges, failed weatherstrip, locks that need a shoulder.

Spec
Hardware + seals
Good for
Doors that drag
How long
Usually one visit

See door repair

Frequently Asked Questions

Straight answers to your What makes a front door impact rated questions. No contractor games or hidden costs.

How does Sunshine State differ from other contractors?

We aren’t storm chasers. We are local owners working out of one shop in Fort Myers, and we measure, permit, install and warranty every job with our own crew. Nothing is handed to a subcontractor who leaves the county after season.

Both meet code. Impact windows are permanent: nothing to put up, nothing to store, and they also help with noise, UV and security. Shutters and screens cost less up front and work well for lanais and large slider runs, but someone has to close them before a storm. Many homes use a combination of both.

Yes, for anything that changes an opening, in both Lee and Collier. We pull it, we submit the product approvals and we meet the inspector at final. You do not deal with the county.
 

Most of Bonita Springs, Estero and Fort Myers is in a 150 mph design-wind-speed zone, with higher requirements along the coast and barrier islands. Every product we install carries a Miami-Dade NOA or Florida Product Approval that meets or exceeds the requirement for your address.

Custom units run six to ten weeks from the factory. Install is usually one to three days depending on how many openings. We tell you the real lead time before you sign, not after.
 

We serve Lee, Collier and Charlotte counties, including Bonita Springs, Naples, Estero, Fort Myers, Cape Coral, Marco Island, Sanibel and Captiva, Punta Gorda and nearby communities. See the full service area.

Serving Fort Myers Florida

Lee County

Fort Myers, North Fort Myers, Fort Myers Beach, Cape Coral, Estero, Lehigh Acres, Sanibel & Captiva Islands, Pine Island, Alva, Bonita Springs

Naples, Marco Island, Golden Gate, Immokalee, Pelican Bay

Port Charlotte, Punta Gorda, Boca Grande