Home › Services › Impact & Entry Doors
Impact & Entry Doors

Impact & Entry Doors for Southwest Florida

Front doors, back doors and French doors rated to the same standard as the glass around them. Measured, permitted and hung by our own crew.

An impact door is a door built to hold its frame when something hits it. The glass is laminated the same way an impact window is, but the real work is the frame and the hardware. A door is a hole in your wall with a moving part in it, and under storm pressure that is the weakest point on the whole elevation.

Fiberglass or aluminum. Fiberglass takes a wood grain finish and insulates better, aluminum takes the bigger openings and the coastal exposure. Glass runs from a small vision panel to a full lite, clear, obscured or decorative, and sidelights and transoms are rated as part of the same assembly.

Finishes are chosen per elevation. White, almond, bronze, black, and wood grains from light oak to dark walnut. Hardware in satin nickel, oil rubbed bronze, matte black or brass. Multipoint locks are standard on French and patio doors because they pull the slab tight at three points, not one.

INTERIOR FINISHES
EXTERIOR PALETTE

Single or double, then the glass, then the hardware. A solid slab with a small vision panel sits at one end and a full lite decorative door with sidelights and a transom at the other. The other thing that moves it is whether the opening is still square, because a door that has dropped needs the frame put right first. We check that at the measure, not halfway through.

Doors carry the same Miami-Dade NOA or Florida Product Approval as the windows, rated for your address. Permits are pulled by us in Lee and Collier. The assembly is approved as a unit, so the numbers on your quote cover the frame and hardware too, not just the glass.

Impact doors explained

What are impact doors for Florida homes?

An impact door is a door built to hold its frame when something hits it. The glass is laminated the same way an impact window is, but the real work is the frame and the hardware. A door is a hole in your wall with a moving part in it, and under storm pressure that is the weakest point on the whole elevation.

So the entire assembly gets rated, not just the glass. Frame, slab, hinges, strike and threshold are approved together as one unit for your wind zone. Dropping a rated slab into an old frame does not give you a rated door, and in Lee or Collier it will not pass inspection.

Day to day it is the door finally sealing the way it should. No draft under the threshold, no water creeping in during a summer storm, and a multipoint lock that pulls the slab tight at three points instead of one. It looks better and it is far harder to force.

Impact entry door, whole assembly rated · Southwest Florida

How it works

Our impact door process.

1.

Free home measure

We measure the opening and check whether it is still square. Most older doors have dropped, and that changes the job.

2.

Pick your slab, glass and hardware

Style, finish and lock choice are yours. We tell you what each one changes and what it costs.

3.

We pull the permit

Product approvals for the whole assembly, engineering if the opening needs it, and the permit in your county.

4.

We hang it and meet the inspector

Our own crew. Frame set and shimmed, threshold sealed, door swept and adjusted before we leave.

Recent installs

Recent Impact Window & Door Projects
across Southwest Florida

Ready to do this? Let’s get you a number.

Answer a few questions and you get a price on the spot. If you want it checked properly after that, we come out and measure every opening ourselves.

Why us for hurricane protection.

Anybody can quote hurricane protection. These are the four things you can go and check on us yourself, before you sign anything.

The whole assembly is rated, not just the glass

Frame, slab, hinges and threshold are approved together. A rated slab in an old frame is not a rated door and will not pass inspection.

We rebuild the opening when it needs it

Older doors drop and the opening goes out of square. We fix that first rather than shimming a new door into a bad hole.

Nobody subcontracts your house

The person who measures is the person who fits it. On a door that matters more than almost anything else we do.

We pull the permit and meet the inspector

Every door replacement in Lee and Collier is permitted and we handle all of it.

What we do

All the window services you need, in one place.

Impact windows, impact and entry doors, sliding glass doors, hurricane shutters, hurricane screens and repairs. Choose what you came for below.

I need to
Impact Windows

Impact Windows

Laminated glass that takes the hit and stays in the frame. Nothing to put up.

Spec
Rated past 150 mph
Good for
Set and forget
How long
1–2 days

See impact windows

Impact Doors

Impact Doors

Entry and patio doors rated to the same standard as the glass around them.

Spec
Coastal-code approved
Good for
Front, back, patio
How long
1 day per door

See impact doors

Front Doors

Front Doors

A new entry that seals, latches and shuts right. Fiberglass, steel or glass.

Spec
Impact optional
Good for
Curb appeal, seal
How long
1 day

See front doors

Glass Repair

Glass Repair

Cracked pane, blown seal, fog between the glass. Re-glazed in the frame you have.

Spec
Re-glaze in frame
Good for
One pane, not a unit
How long
3–7 days for glass

See glass repair

Door Repair

Door Repair

Sticking slabs, dropped hinges, failed weatherstrip, locks that need a shoulder.

Spec
Hardware + seals
Good for
Doors that drag
How long
Usually one visit

See door repair

Frequently Asked Questions

Straight answers to your impact doors questions. No contractor games or hidden costs.

How does Sunshine State differ from other contractors?

We aren’t storm chasers. We are local owners working out of one shop in Bonita Springs, and we measure, permit, install and warranty every job with our own crew. Nothing is handed to a subcontractor who leaves the county after season.

Both meet code. Impact windows are permanent: nothing to put up, nothing to store, and they also help with noise, UV and security. Shutters and screens cost less up front and work well for lanais and large slider runs, but someone has to close them before a storm. Many homes use a combination of both.

Yes, for anything that changes an opening, in both Lee and Collier. We pull it, we submit the product approvals and we meet the inspector at final. You do not deal with the county.
 

Most of Bonita Springs, Estero and Fort Myers is in a 150 mph design-wind-speed zone, with higher requirements along the coast and barrier islands. Every product we install carries a Miami-Dade NOA or Florida Product Approval that meets or exceeds the requirement for your address.

Custom units run six to ten weeks from the factory. Install is usually one to three days depending on how many openings. We tell you the real lead time before you sign, not after.
 

We serve Lee, Collier and Charlotte counties, including Bonita Springs, Naples, Estero, Fort Myers, Cape Coral, Marco Island, Sanibel and Captiva, Punta Gorda and nearby communities. See the full service area.

Serving Bonita Springs Florida

Lee County

Bonita Springs, Fort Myers, North Fort Myers, Cape Coral, Pine Island, Lehigh Acres, Alva, Estero, Fort Myers Beach, Sanibel & Captiva Islands

Naples, Marco Island, Golden Gate, Immokalee, Pelican Bay

Port Charlotte, Punta Gorda, Boca Grande